S-SERIES FIBER OPTIC ILLUMINATOR SPECIFICATIONS

MOUNTING Vertical (interior/exterior), horizontal (interior only) hardwire units are suitable for wet locations and can be mounted with 4ft above ground
OUTSIDE DIMENSIONS Height 17 7/8", depth 6 ¾", width 8 1/16"
OUTER CASE 0.075" formed sheet metal, zinc plated
EXTERIOR FINISH Black semi-gloss polyester powder coating
INTERIOR CHASSIS Black anodized machined aluminum plates with stainless steel hardware
FIBER OPTIC BUSHING 1 7/8" glue cup
FIBER PROGRAM TRACKING ARCH 1 5/8" from bushing center to motor shaft center
INTERIOR CHASSIS Minimum 0.015" between tracks
BUSHING TEMPERTURE 105°F at the bushing face with an ambient air temperature of 75°F
THERMALLY PROTECTED Auto reset
LAMP Non specified lamps may damage fiber and VOID warranty, see OPTIONS, LAMP
PROGRAM DISK 5 ¼" Clear Lexan® disk, see OPTIONS, PROGRAM or ART DISK ROTATION
MOTOR 1rpm, see OPTIONS, MOTOR RPM
STANDARD LINE VOLTAGE 120 VAC 60Hz
ELECTRICAL CONNECTION See OPTIONS, ELECTRICAL
ELECTRICAL CONSUMPTION 200 W maximum
FUSE LOAD 4 A
ON/OFF CONTROL Push button, see OPTIONS, ELECTRICAL
LINE CORD See OPTIONS, ELECTRICAL
APPROVALS ETL/CSA listed for interior & exterior applications. Also tested per UL standard 1571, 4th edition, for wet locations

Options
LAMP: Lamp Brand ANSI code Lamp Wattage Average Life
Sylvania BAB 20 W 2,000 hours
GE EXK 50 W 3,500 hours
GE EYC 75 W 3,500 hours
GE ELC 250 W 1,000 hours
External dimming, dissimilar IEC socket and plug
ELECTRICAL: External push button ONOFF with detachable IEC socket and plug or hardwire unit with ¾" exterior conduit connector for remote ON/OFF and/or dimming control
PROGRAM or ART DISK ROTATION: Clockwise (standard) or counter clockwise
MOTOR RPM: 2, 4, 6, 8, 10, 12
PROGRAM DISK INDEXING Low voltage control trigger 3.5-15 VDC, locking 3 pin control socket and plug (For interior use only)
HOME POSITION  
INTERNATIONAL VOLTAGES AVAILABLE
MOUNTING KIT: External mounting flanges

CLICK HERE FOR MODELS